TBM Partial Excavation Design and Burial Challenges

tunnel boring machine (TBM) also known as a “mole“, is a machine used to excavate tunnels with a circular cross section through a variety of soil and rock strata. They can bore through hard rock, sand, and almost anything in between. Tunnel diameters can range from a metre (done with micro-TBMs) to almost 16 metres to date. Tunnels of less than a metre or so in diameter are typically done using trenchless construction methods or horizontal directional drilling rather than TBMs.

Tunnel boring machines are used as an alternative to drilling and blasting (D&B) methods in rock and conventional ‘hand mining’ in soil. TBMs have the advantages of limiting the disturbance to the surrounding ground and producing a smooth tunnel wall. This significantly reduces the cost of lining the tunnel, and makes them suitable to use in heavily urbanized areas. The major disadvantage is the upfront cost. TBMs are expensive to construct, and can be difficult to transport. However, as modern tunnels become longer, the cost of tunnel boring machines versus drill and blast is actually less—this is because tunnelling with TBMs is much more efficient and results in a shorter project.

Organizer

Tunnelling Association of India Young Members (TAIym)

Speaker

Event Details

Date & Time – July 22, 2022 & 7.30 PM IST


One Reply to “TBM Partial Excavation Design and Burial Challenges”

Leave a Reply

Your email address will not be published.